SuperLoop Series - Class D

Super Loop Series - Class D

The SuperLoop Series Class D are a digital range of of Superloop amplifiers - They have replaced our conventional superloop series and provide additional facilities such as Self Diagnostics, Parametric metal loss control and Remote Monitor Outputs in a smaller, lighter housing with high effeciency low thermal output.

The higher output voltage of the SLS Clas D amplifiers are more suited to meeting the demands of the revised standard ISC 60118-4 2014 and are also capable of driving 2 turn loops as facilitated by the introduction of our dual track 12.5mm copper tape.

The SLS 7 is the largest in the range, providing 2 channels at 100V, 10A each, far exceeding the output power of the old PLS-700 which it replaces

Both ranges of SuperLoop Ampliers can deliver *Ultra-low spill performance with area coverage similar to the PLS and PLS-X ranges, but with superior metal loss compensation and near 3 dimensional uniform field strength.

SuperLoops are used in similar applications to the Professional induction Loop Series, but with the added advantages stated they can also be used in adjacent room locations such as cinema and lecture theatres and in areas where construction metal will absorb the signal rendering a conventional induction loop system below standard.

* Ultra-Low spill performance is achieved through the combination of the SuperLoop amplifier and the loop design. Where other factors such as installation or cost constraints are more important than Spill control a custom loop design can be offered free of charge.

Features & Benefits

The Amplifiers

Class D - very high efficiency convection cooled
1U, 19" rack mount (ears Included) No spacing between units required
Self Diagnostics buit in
Parametric metal loss correction
Remote outputs for Monitor Speaker, Input Signal and Output Current
3 inputs including mic, Line and 100V Line
Featured in Univox Loop design Software
5 year warranty for peace of mind and low cost of ownership.

SuperLoop Technology

Ultra-Low spill as standard simplifying the design process & reducing risk of magnetic feedback.
Low field strength & frequency response variation throughout listening volume for easy listening.
Near 3D coverage to maintain complian
Engineered for simplicity making standard compliant design and installation easy
t signal with head tilted
Low quiescent (standby) current for good economy
Proprietary Dual Action AGC 'Always On' technology so you never miss a word

Product Name	Square Area Coverage	Single Unit	Estimated Spill	Inputs	Datasheet	Installation Manual
SLS-1	275m²	Yes	1.4m	3	3	3
SLS-3	550m²	Yes	1.4m	3
SLS-5	700m²	Yes	1.4m	3
SLS-7	4200m²	Yes	1.4m	3
SLS-7 (DANTE)	4200m²	Yes	1.4m	3

*Higher power capability for greater metal loss compensation

Induction Loops for Vehicles

This range of products has been designed specifically for vehicle application and include induction loop amplifiers for lifts, trains. trams, boats, metro, coaches, taxis, minibuses and private cars. For More information see Induction Loops for Transport which includes other ranges for fixed applications in the transport sector such as Help Points and Ticket counters.

Features & Benefits

Wide input voltage range for installation flexibility
5 year warranty for peace of mind
Rugged construction and short circuit proof for reliability
High output current for high loss compensation

Product Name	Vehicle Type	Power Supply	Output Current	Inputs
Autoloop	Cars, Taxis,	12V d.c.	*10A	1 x Mic/Line, 1 x Line
CLS-1	Cars, Taxis	12V-18V d.c.	*9A pp	1 mic, 1 line, 1 mic/line
TLS-2	Trams, Trains	12V-50V d.c.	*30A rms	2 mic/line
CLS-5	Buses Coaches, Lifts	110V-240V a.c. 12V-24V d.c.	*16A pp	7 including Optical
MLS-1 OEM Module	Lifts	. 12V-24V d.c.	*15A pp	1 mic/line

* maximum output current is dependent on supply voltage

Counter Loop series - Installed and Portable

Counter Loop Systems - Installed and Portable

The Cross Counter Systems are kits containing everything you need to make standard compliant installations at ticket counters, shop counters, reception desks and other small areas up to 50m². But if you need portability, choose Smart Loop

The kits comprise CLS-1 loop amplifier, mounting holder, loop pad, choice of microphones and loop label

Features & Benefits

Suplied as a kit making it quick and easy to install.
When correctly installed and adjusted, systems will comply with IEC 60118-4
5 year warranty for peace of mind
High output current for superior metal loss compensation
Dual Action AGC, 'Always on' technology so you never miss a word.
Low spill meaning systems can be installed as close as 1m apart (between loop pads)
Includes mounting Holder

s

Product Name	Square Area Coverage	Loop Amplifier	Ouput Current	Microphone	Loop	Datasheet	Installation Manual
CTC-120	counter (or 50m²)	CLS-1	9A pp	AVLM5 glass/wall	Pad
CTC-121	counter (or 50m²)	CLS-1	9A pp	M-2 goose neck	Pad

Portable

Smart Loop with Stand Fitted — Smart Loop with stand fitted

Where the flexibility offered by a portable loop is required then choose SmartLoop. This is a 1- 1 loop system that can be used at counters, in meetings on mains or battery. It can even be installed.

Univox SmartLoop assists in most types of one-to-one meetings, providing versatile desktop induction loop assistance for hearing aid users. The portable induction loop is powered by a rechargeable Lithium Polymer battery and ready for immediate use. No installation work is required.

This very versatile hearing loop product can be used in differnt ways. The slim low-profile design allows for placement on a flat surface between two or several people meeting without being intrusive and can be used either with the built-in microphone or an external headset, lapel or omni-directional conference microphone connected to the 3.5mm mic input.

SmartLoop can also be used as a traditional portable desktop loop with the supplied stand mounted. The unit will now be in an upright position, easy to spot with hearing loop signage.

With induction loop driver and a loop integrated into a single unit, SmartLoop is ideal for a quick and simple installation in counter/desk applications, such as ticket, service and retail counters or receptions desks. Just attach the unit underneath the counter and connect a microphone, preferably AVLM5, M-2 or CBL 410 microphone. Unless the counter itself is only temporary, you will need to use the mains adapter

Features & Benefits

Compact and easy to use
Light and slim-only15mm thick
Multiple functions- portable or quck install CTC system
Class D Technology - high efficiency
Dual Action AGC, 'Always on' technology so you never miss a word.
Li-Polymer Battery - high capacity, long life
Integrated microphone with external mic option

Data Sheet

User Guide

Low Power Series

Low Power induction loop Series

The low power series of loop amplifiers are equally at home in the domestic or professional setting. They have been designed to facilitate easy integration with a TV system. All the amplifiers feature our unique dual action AGC ‘Always on Technology’ and high output current to provide the same excellent audio quality and sound clarity that you expect from our professional range.

The new CLS-5 includes optical/coaxial input.

Features & Benefits

2 Year Warranty for peace of mind and low cost of ownership
Proprietary Dual Action AGC ‘Always on Technology’ so you never miss a word
Very high output current compared to competitor products in the same class for superior performance
Short circuit proof electronics for your safety.
Multiple inputs for installation flexibility
High quality audio for clarity and intelligibility

Product Name	Square Area Coverage	Inputs
DLS3	30m²	3
AutoLoop	50m²	2
CLS- 1 (was DLS50)	50m²	3
CLS-5	200m²	7

Portable Loop Series

The Portable induction loop series are complete induction loop systems in a wheeled flight case. Weighing between 8Kg & 10Kg depending on the options selected, these systems are truly portable without compromising on performance.
All models use the same induction loop amplifier. They are supplied with a loop cable dispenser (35m of cable), loop extension cable (15m) and a Univox® Loop Listener
The type and quantity of microphones included depend on the model selected

Features & Benefits

Aluminium wheeled flight case for durability and portability.
Dual action AGC, 'Always on' Technology so you never miss a word
5 year warranty for peace of mind and low cost of ownership
Non-inductively wound loop cable spool for quick trouble free deployment.
3 inputs for programme flexibility
line output for use with an audio system.
High output current to maintain signal strength where construction metal is present

Product Name	Square Area Coverage	Single Unit	Receivers	Microphones	Charger
P-Loop 2.0	150m²	Up to 3 x room width	N/A	N/A	N/A
P-Loop 2.A	150m²	Up to 3 x room width	1 x diversity	1 hand-held microphone	cable only
P-Loop 2.B	150m²	Up to 3 x room width	1 x diversity	1 body pack transmitter, with single sided head set	yes
P-Loop 2.C	150m²	Up to 3 x room width	2 x diversity	1 hand-held, 1 body pack transmitter with single sided headset	yes
P-Loop 2.D	150m²		2 x diversity	2 body pack transmitters with single sided headsets	yes

Professional Induction Loop Series

The Professional induction Loop Series is capable of driving perimeter, figure 8 and multi loop systems for area coverage up to 1800m².
These products are used in a wide range of applications such as small, medium and large meeting rooms, conference suites and places of worship, theatres, etc. But only where spill control is not an issue and signal absorption from constructional metal is not a big concern.

The PLS- X Range

The PLS-X1, X3 and X5 are highly efficient professional loop drivers. Using digital transformer technology has eliminated transformer modulation distortion further improving the listening experience for hearing aid users. In addition, being more than 8 times more efficient than conventional technology it has enabled smaller and lighter construction with lower power consumption and less heat dissipation. The amplifiers are all packaged in stylish, convection cooled, 1/2 width 1U housings (19" rack). Operating in silence, they use less energy, generate less heat and cost less to run than conventional systems. With a 5 year warranty and a host of features to simplify installation and operation, they will soon become everyone's first choice.

Features & Benefits

5 Year Warranty for peace of mind and low cost of ownership
Proprietary Dual action AGC 'Always on' technology so you never miss a word
3 inputs with at least 2 being programmable for installation ease and flexibility
Engineered for simplicity making standard compliant design and installation easy
Rugged mechanical housing and short circuit proof electronics to extend reliability
Very high output power compared to competitor products in the same class, for superior performance.

PLS - X Series Additional Features

System diagnostics for rapid test and set-up
Parametric metal loss compensation for more accurate compensation on all metal types
100V line input for input flexibility
includes 19" rack mount ears and blanking plate
1 U 1/2 19" housing
High efficiency

PLS Class D Tech Series

Univox PLS-6 is is the first in the PLS Class D Tech loop drive series. It is suitable for a wide range of loop configurations, single- and 2-turn perimeter loops and multi-loops, enabling flexibility in system performance. The high eﬃciency class D design design has resulted in a series of loop drivers considerably smaller and lighter than their predecessors, with enhanced output power optimized for modern hearing loop system design. As with all PLS-series drivers, the PLS-6 is designed for durable performance and easy installation. The combination of Univox technology, electronic transfoirmer and silent, fan-free operation delivers an unsurpassed loop driver with high audio quality.

Univox PLS-7 is the highest powered single output loop driver in our range and probably anyone elses? With 100V, 20A output it can comfortably cover an area in excess of 600m². This amplifier is also avalable with DANTE

Features & Benefits

5 Year Warranty for peace of mind and low cost of ownership
Proprietary Dual action AGC 'Always on' technology so you never miss a word
3 inputs with at least 2 being programmable for installation ease and flexibility
Engineered for simplicity making standard compliant design and installation easy
Rugged mechanical housing and short circuit proof electronics to extend reliability
Very high output power compared to competitor products in the same class, for superior performance.

PLS Class DTech Series Additional Features

System diagnostics for rapid test and set-up
Parametric metal loss compensation for more accurate compensation on all metal types
100V line input for input flexibility
includes 19" rack mount ears and blanking plate
1 U 19" housing
Very High efficiency

Name	Square Area Coverage	Super 8 Figure 8 Area Coverage	Estimated Spill	Inputs
PLS-X1	130m²	250m²	Up to 3 room widths	1 XLR line/mic 1 Phoenix line/100V line 1 phoenix/phono line
PLS-X3	260m²	450m²	Up to 3 room widths	1 XLR line/mic 1 Phoenix line/100V line 1 phoenix/phono line
PLS-X5	450m²	900m²	Up to 3 room width	1 XLR line/mic 1 Phoenix line/100V line 1 phoenix/phono line
PLS-6	500m²	1650m²	Up to 3 room widths	1 x XLR line/mic 1 x pheonix line/100V line 1 x pheonix/phono line
PLS-7	>500m² (Limited by field strength uniformity constraints, not power)	4200m²	Up to 3 room widths	1 X XLR line/mic 1 x pheonix line/100V line 1 x pheonix/phono line

*Superior power output to overcome high losses associated with some construction metal

Super Loop Series

The SuperLoop Series - is always *Ultra-low spill and provides similar area coverage to the PLS, but with superior metal loss compensation and near 3 dimensional uniform field strength.
These products are used in similar applications to the Professional induction Loop Series, but with the added advantages stated they can also be used in adjacent room locations such as cinema and lecture theatres and in areas where construction metal will absorb the signal rendering a conventional induction loop system below standard.

* Ultra-Low spill performance is achieved through the combination of the SuperLoop amplifier and the loop design. Where other factors such as installation or cost constraints are more important than Spill control a custom loop design can be offered free of charge.

Class D Super Loop Amplifier Series

The SuperLoop Class D Series is a range of digital Superloop amplifiers - They have replaced our conventional superloop amplifiers and provide additional facilities such as Self Diagnostics, Parametric metal loss control and Remote Monitor Outputs in a smaller, lighter housing with high effeciency low thermal output.

The higher output voltage of the SLS Clas D amplifiers are more suited to meeting the demands of the revised standard IEC 60118-4 2014 and are also capable of driving 2 turn loops as facilitated by theuse of our dual track 12.5mm copper tape.

The SLS 7 is the largest superLoop Amplifier in the range, with 2 x 10 Amps per channel at 100V the output power far exceeds that of its predecessor, the SLS700. This amplifier is also available with DANTE

Features & Benefits

Class D SuperLoop Amplifiers

Class D - very high efficiency convection cooled
1U, 19" rack mount (ears Included) No spacing between units required
Self Diagnostics buit in
Parametric metal loss correction
Remote outputs for Monitor Speaker, Input Signal and Output Current
3 inputs including mic, Line and 100V Line
Featured in Univox Loop design Software

SuperLoop Technology

Ultra-Low spill as standard simplifying the design process & reducing risk of magnetic feedback.
Low field strength & frequency response variation throughout listening volume for easy listening.
Engineered for simplicity making standard compliant design and installation easy
Near 3D coverage to maintain compliant signal with head tilted
Low quiescent (standby) current for good economy
Proprietary Dual Action AGC 'Always On' technology so you never miss a word
5 year warranty for peace of mind and low cost of ownership.

Product Name	Square Area Coverage	Single Unit	Estimated Spill	Inputs
SLS-1 Class D	275m²	Yes 1U	1.4m	3
SLS-3 Class D	550m²	Yes 1U	1.4m	3
SLS-5 Class D	700m²	Yes 1U	1.4m	3
SLS 7 Class D NEW	4200m²	Yes, 1U	1.4m	3
SLS-7 with DANTE	4200m²	Yes, 1U	1.4m	3

*Higher power capability for greater metal loss compensation

Portable Loop Series

The Portable induction loop series are complete induction loop systems in a wheeled flight case. Weighing between 8Kg & 10Kg depending on the options selected, these systems are truly portable without compromising on performance.
All models use the same induction loop amplifier. They are supplied with a loop cable dispenser (35m of cable), loop extension cable (15m) and a Univox® Loop Listener
The type and quantity of microphones included depend on the model selected

Features & Benefits

Aluminium wheeled flight case for durability and portability.
Dual action AGC, 'Always on' Technology so you never miss a word
5 year warranty for peace of mind and low cost of ownership
Non-inductively wound loop cable spool for quick trouble free deployment.
3 inputs for programme flexibility
line output for use with an audio system.
High output current to maintain signal strength where construction metal is present

Product Name	Square Area Coverage	Single Unit	Receivers	Microphones	Charger
P-Loop 2.0	150m²	Up to 3 x room width	N/A	N/A	N/A
P-Loop 2.A	150m²	Up to 3 x room width	1 x diversity	1 hand-held microphone	cable only
P-Loop 2.B	150m²	Up to 3 x room width	1 x diversity	1 body pack transmitter, with single sided head set	yes
P-Loop 2.C	150m²	Up to 3 x room width	2 x diversity	1 hand-held, 1 body pack transmitter with single sided headset	yes
P-Loop 2.D	150m²		2 x diversity	2 body pack transmitters with single sided headsets	yes

Counter Loop Systems - Installed and Portable

The Cross Counter Systems are kits containing everything you need to make standard compliant installations at ticket counters, shop counters, reception desks and other small areas up to 50m². But if you need portability, choose Smart Loop

The kits comprise CLS-1 loop amplifier, mounting holder, loop pad, choice of microphones and loop label

Features & Benefits

Suplied as a kit making it quick and easy to install.
When correctly installed and adjusted, systems will comply with IEC 60118-4
5 year warranty for peace of mind
High output current for superior metal loss compensation
Dual Action AGC, 'Always on' technology so you never miss a word.
Low spill meaning systems can be installed as close as 1m apart (between loop pads)
Includes mounting Holder

s

Product Name	Square Area Coverage	Loop Amplifier	Ouput Current	Microphone	Loop	Datasheet	Installation Manual
CTC-120	counter (or 50m²)	CLS-1	9A pp	AVLM5 glass/wall	Pad
CTC-121	counter (or 50m²)	CLS-1	9A pp	M-2 goose neck	Pad

Portable

Where the flexibility offered by a portable loop is required then choose SmartLoop. This is a 1- 1 loop system that can be used at counters, in meetings on mains or battery. It can even be installed.

Univox SmartLoop assists in most types of one-to-one meetings, providing versatile desktop induction loop assistance for hearing aid users. The portable induction loop is powered by a rechargeable Lithium Polymer battery and ready for immediate use. No installation work is required.

This very versatile hearing loop product can be used in differnt ways. The slim low-profile design allows for placement on a flat surface between two or several people meeting without being intrusive and can be used either with the built-in microphone or an external headset, lapel or omni-directional conference microphone connected to the 3.5mm mic input.

SmartLoop can also be used as a traditional portable desktop loop with the supplied stand mounted. The unit will now be in an upright position, easy to spot with hearing loop signage.

With induction loop driver and a loop integrated into a single unit, SmartLoop is ideal for a quick and simple installation in counter/desk applications, such as ticket, service and retail counters or receptions desks. Just attach the unit underneath the counter and connect a microphone, preferably AVLM5, M-2 or CBL 410 microphone. Unless the counter itself is only temporary, you will need to use the mains adapter

Features & Benefits

Compact and easy to use
Light and slim-only15mm thick
Multiple functions- portable or quck install CTC system
Class D Technology - high efficiency
Dual Action AGC, 'Always on' technology so you never miss a word.
Li-Polymer Battery - high capacity, long life
Integrated microphone with external mic option

Data Sheet

User Guide

Induction Loops for Vehicles

This range of products has been designed specifically for vehicle application and include induction loop amplifiers for lifts, trains. trams, boats, metro, coaches, taxis, minibuses and private cars. For More information see Induction Loops for Transport which includes other ranges for fixed applications in the transport sector such as Help Points and Ticket counters.

Features & Benefits

Wide input voltage range for installation flexibility
5 year warranty for peace of mind
Rugged construction and short circuit proof for reliability
High output current for high loss compensation

Product Name	Vehicle Type	Power Supply	Output Current	Inputs
Autoloop	Cars, Taxis,	12V d.c.	*10A	1 x Mic/Line, 1 x Line
CLS-1	Cars, Taxis	12V-18V d.c.	*9A pp	1 mic, 1 line, 1 mic/line
TLS-2	Trams, Trains	12V-50V d.c.	*30A rms	2 mic/line
CLS-5	Buses Coaches, Lifts	110V-240V a.c. 12V-24V d.c.	*16A pp	7 including Optical
MLS-1 OEM Module	Lifts	. 12V-24V d.c.	*15A pp	1 mic/line

* maximum output current is dependent on supply voltage

Low Power induction loop Series

The low power series of loop amplifiers are equally at home in the domestic or professional setting. They have been designed to facilitate easy integration with a TV system. All the amplifiers feature our unique dual action AGC ‘Always on Technology’ and high output current to provide the same excellent audio quality and sound clarity that you expect from our professional range.

The new CLS-5 includes optical/coaxial input.

Features & Benefits

2 Year Warranty for peace of mind and low cost of ownership
Proprietary Dual Action AGC ‘Always on Technology’ so you never miss a word
Very high output current compared to competitor products in the same class for superior performance
Short circuit proof electronics for your safety.
Multiple inputs for installation flexibility
High quality audio for clarity and intelligibility

Product Name	Square Area Coverage	Inputs
DLS3	30m²	3
AutoLoop	50m²	2
CLS- 1 (was DLS50)	50m²	3
CLS-5	200m²	7

OEM Induction Loop Modue

Univox MLS-1 is ideal for integration into systems requiring high energy efficiency and low heat generation.
MLS-1 can be easily integrated into small area communication systems, such
as intercoms, emergency phones, information- and help points, kiosks etc.

Equipped with athe Univox’ dual action AGC function, MLS-1 allows for simple
connection to different input signal levels.
Univox MLS-1 features Metal Loss Compensation (MLC) which enables fine
tuning and compensation for metal loss and attenuation effects.

A fully integrated, correctly installed MLS-1 system, complies with all the
requirements of the IEC 60118-4 : 2015 standard.

Features & Benefits

2 Year Warranty for peace of mind and low cost of ownership
Super compact high output amplifier
Class D technology for exceptional efficiency and low heat dissipation
Galvanically isolated balanced input
Mic/Line level compatible
Dual Action AGC
Metal Loss Correction control.

Datasheet

Installation Guide

Typical Elevator Application

The MLS-1 can be used for local 'intercom coverage or full area coverage of an elevator depending on the elevator's construction and size. The table below shows some tyical solutions for a 2m x 1.3m elevator .

Product Name	Cable [c.s.a.]	Loop Length	R (Ohms)	N^o turns	Total cable length
Univox MSL-1	0.5mm^2.	6.6m	1.5	7	44m
UnivoxMSL-1	1mm²	6.6m	1.5	13	88m

SuperLoop Series - Class D

Super Loop Series - Class D

Features & Benefits

Induction Loops for Vehicles

Induction Loops for Vehicles

Features & Benefits

Counter Loop series - Installed and Portable

Counter Loop Systems - Installed and Portable

Features & Benefits

Portable

Features & Benefits

Low Power Series

Low Power induction loop Series

Features & Benefits

Portable Loop Series

Portable Loop Series

Features & Benefits

More Articles ...

Professional Induction Loop Series

The PLS- X Range

Features & Benefits

PLS - X Series Additional Features

PLS Class D Tech Series

Features & Benefits

PLS Class DTech Series Additional Features

Super Loop Series

Features & Benefits

Portable Loop Series

Features & Benefits

Counter Loop Systems - Installed and Portable

Features & Benefits

Portable

Features & Benefits

Induction Loops for Vehicles

Features & Benefits

Low Power induction loop Series

Features & Benefits

OEM Induction Loop Modue

Features & Benefits

Typical Elevator Application

Domestic Assistive Listening

Assistive Listening for Transport

Professional Loop Systems

Pre-recorded Tour Guides

Professional FM Systems

Live Tour Guide Systems

Fixed Architecture DSP

Open Architecture DSP

Digital Audio Amplifiers

Speaker Arrays

Amplifiers - Signal Processing

Accesories for Liturgy

Test And Measurement

Accessories

Univox® IR System

Login