SuperLoop Series - Class D
Super Loop Series - Class D
The SuperLoop Series Class D are a digital range of of Superloop amplifiers - They have replaced our conventional superloop series and provide additional facilities such as Self Diagnostics, Parametric metal loss control and Remote Monitor Outputs in a smaller, lighter housing with high effeciency low thermal output.
The higher output voltage of the SLS Clas D amplifiers are more suited to meeting the demands of the revised standard ISC 60118-4 2014 and are also capable of driving 2 turn loops as facilitated by the introduction of our dual track 12.5mm copper tape.
The SLS 7 is the largest in the range, providing 2 channels at 100V, 10A each, far exceeding the output power of the old PLS-700 which it replaces
Both ranges of SuperLoop Ampliers can deliver *Ultra-low spill performance with area coverage similar to the PLS and PLS-X ranges, but with superior metal loss compensation and near 3 dimensional uniform field strength.
SuperLoops are used in similar applications to the Professional induction Loop Series, but with the added advantages stated they can also be used in adjacent room locations such as cinema and lecture theatres and in areas where construction metal will absorb the signal rendering a conventional induction loop system below standard.
* Ultra-Low spill performance is achieved through the combination of the SuperLoop amplifier and the loop design. Where other factors such as installation or cost constraints are more important than Spill control a custom loop design can be offered free of charge.
Features & Benefits
The Amplifiers
- Class D - very high efficiency convection cooled
- 1U, 19" rack mount (ears Included) No spacing between units required
- Self Diagnostics buit in
- Parametric metal loss correction
- Remote outputs for Monitor Speaker, Input Signal and Output Current
- 3 inputs including mic, Line and 100V Line
- Featured in Univox Loop design Software
- 5 year warranty for peace of mind and low cost of ownership.
SuperLoop Technology
- Ultra-Low spill as standard simplifying the design process & reducing risk of magnetic feedback.
- Low field strength & frequency response variation throughout listening volume for easy listening.
- Near 3D coverage to maintain complian
- Engineered for simplicity making standard compliant design and installation easy
- t signal with head tilted
- Low quiescent (standby) current for good economy
- Proprietary Dual Action AGC 'Always On' technology so you never miss a word
| Product Name | Square Area Coverage | Single Unit | Estimated Spill | Inputs | Datasheet | Installation Manual |
|---|---|---|---|---|---|---|
| SLS-1 | 275m² | Yes | 1.4m | 3 | 3
|
3
|
| SLS-3 | 550m² | Yes | 1.4m | 3 |
|
|
| SLS-5 | 700m² | Yes | 1.4m | 3 |
|
|
| SLS-7 | 4200m2 | Yes | 1.4m | 3 |
|
|
| SLS-7 (DANTE) | 4200m2 | Yes | 1.4m | 3 |
|
|
*Higher power capability for greater metal loss compensation
