SuperLoop Series
Super Loop Series
The SuperLoop Series - is always *Ultra-low spill and provides similar area coverage to the PLS, but with superior metal loss compensation and near 3 dimensional uniform field strength.
These products are used in similar applications to the Professional induction Loop Series, but with the added advantages stated they can also be used in adjacent room locations such as cinema and lecture theatres and in areas where construction metal will absorb the signal rendering a conventional induction loop system below standard.
* Ultra-Low spill performance is achieved through the combination of the SuperLoop amplifier and the loop design. Where other factors such as installation or cost constraints are more important than Spill control a custom loop design can be offered free of charge.
Class D Super Loop Amplifier Series
The SuperLoop Class D Series is a range of digital Superloop amplifiers - They have replaced our conventional superloop amplifiers and provide additional facilities such as Self Diagnostics, Parametric metal loss control and Remote Monitor Outputs in a smaller, lighter housing with high effeciency low thermal output.
The higher output voltage of the SLS Clas D amplifiers are more suited to meeting the demands of the revised standard IEC 60118-4 2014 and are also capable of driving 2 turn loops as facilitated by theuse of our dual track 12.5mm copper tape.
The SLS 7 is the largest superLoop Amplifier in the range, with 2 x 10 Amps per channel at 100V the output power far exceeds that of its predecessor, the SLS700. This amplifier is also available with DANTE
Features & Benefits
Class D SuperLoop Amplifiers
- Class D - very high efficiency convection cooled
- 1U, 19" rack mount (ears Included) No spacing between units required
- Self Diagnostics buit in
- Parametric metal loss correction
- Remote outputs for Monitor Speaker, Input Signal and Output Current
- 3 inputs including mic, Line and 100V Line
- Featured in Univox Loop design Software
SuperLoop Technology
- Ultra-Low spill as standard simplifying the design process & reducing risk of magnetic feedback.
- Low field strength & frequency response variation throughout listening volume for easy listening.
- Engineered for simplicity making standard compliant design and installation easy
- Near 3D coverage to maintain compliant signal with head tilted
- Low quiescent (standby) current for good economy
- Proprietary Dual Action AGC 'Always On' technology so you never miss a word
- 5 year warranty for peace of mind and low cost of ownership.
| Product Name | Square Area Coverage | Single Unit | Estimated Spill | Inputs | Datasheet | Installation Manual |
|---|---|---|---|---|---|---|
| SLS-1 Class D | 275m² | Yes 1U | 1.4m | 3 |
|
|
| SLS-3 Class D | 550m² |
Yes 1U |
1.4m | 3 |
|
|
| SLS-5 Class D | 700m² |
Yes 1U |
1.4m | 3 |
|
|
| SLS 7 Class D NEW | 4200m² | Yes, 1U | 1.4m | 3 |
|
|
| SLS-7 with DANTE | 4200m2 | Yes, 1U | 1.4m | 3 |
|
|
*Higher power capability for greater metal loss compensation
